Recycling of Silt in Construction Products
Article PDF

Keywords

Block specimen, cured, compressive strength, ambient temperature

How to Cite

Waziri, A. B., Haruna, M., & Mohammed, N. (2025). Recycling of Silt in Construction Products. Engineering Research Journal, 5(3), 42-57. https://www.openjournals.ijaar.org/index.php/erj/article/view/1453

Abstract

Silt is the final product obtained in the recycling plants as filter cake, silt product is regarded as the waste from the plants and generally disposed as land fill, which can cause environmental hazards. The aim of this project was to find means on how to recycle/reuse silt product as a construction product. Block specimens were made, mixed with glass powder at different percentage by weight. The glass content in the mixture ranges from 0%-15% at 5% intervals. Two curing procedures were investigated. Firstly, cured at ambient temperature and secondly cured at 9500C. Six specimens of each percentage by weight were made. Compressive was conducted on the specimens, and the test data obtained was used to determine the compressive strength of the specimens.

Article PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright (c) 2025 Engineering Research journal

466 156