Engineering Behaviour of Cement-Stabilized Lateritic Soils Derived from Various Geologic Formations in Awka Area, Southeastern Nigeria
Article PDF
Article XPS

Keywords

Engineering behaviour
lateritic soils
geotechnical properties
cement-stabilization
Awka area

How to Cite

Kalu, Z.U., Okeke O.C., Onunkwo A.A., Agidi, B.M., Amadi, C.C., & Onwuchekwa, C.N. (2024). Engineering Behaviour of Cement-Stabilized Lateritic Soils Derived from Various Geologic Formations in Awka Area, Southeastern Nigeria. Engineering Research Journal, 4(4), 32-53. https://www.openjournals.ijaar.org/index.php/erj/article/view/529

Abstract

The need for adequate assessment of lateritic soils used as construction material will help to avoid or prevent failure of civil engineering structures like roads, high rise buildings, bridges, railways etc. The engineering behaviour of cement-stabilized lateritic soil derived from various geologic formations in Awka area was undertaken to improve its strength and durability on construction work. Laboratory tests carried out include: particle size distribution, atterberg limits, California bearing ratio, compaction test, specific gravity and moisture content tests and their behaviour in terms of changes in geotechnical properties for control test (without cement) and on treatment with various percentages of cement (5%, 10%, 15%, 20%, 25%). Result of the study shows that liquid limit and plasticity index values of the treated soils were reduced while the maximum dry density and California bearing ratio (CBR) values were increased. The results of the study on particle size distribution shows the soil as fine to coarse grained, and the result on the specific gravity of the laterites grades the soil as organic. There were marked reductions on atterberg limits for example, at 15% cement applications using Laterites from Amansea location 1; 37.05% to 33.95%, 13.67% to 11.90% on liquid limit and plasticity index with a reduction percentage of 8% and 13% respectively. At the same 15%, using Laterites from Amansea location 2, maximum dry density (MDD) increased from 1.67Mg/m3 to 1.84Mg/m3 and California bearing ratio (CBR), increased from 7.15% to 53.62%. These values for strength characteristics (CBR and MDD) and swearing potentials (plasticity index and liquid limit) fall within the limits of FMWH, 1997 specifications for soils used as sub grade and base materials for civil engineering works. It is therefore important to say that cement-stabilization is very effective in improving strength properties and swearing potentials to reach the expected values from the analysis of the lateritic soils in Awka area, and therefore helps to cushion the problems or effects of cracks on roads, buildings and other construction works and its subsequent failures occasioned by changes that may occur during rainy (wetting) and dry (drying) seasons, while also increasing the bearing capacity respectively. We can therefore conclude that, geotechnical properties of lateritic soils be tested before being used for various civil engineering works to ascertain their engineering behaviours.

Article PDF
Article XPS
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright (c) 2024 Engineering Research journal

761 417