Abstract
In the engineering context, soil is a complex material resulting from the weathering of rocks and plays a crucial role in supporting structural foundations. The study focused on determining the soil bearing capacity at the Permanent Site of the Nigerian Army College of Environmental Science and Technology. The investigation revealed that the site's soil is uniform in terms of profile, particle size, and non-plasticity properties across all six locations studied. The soil is characterized by silt and predominantly fine sand content with little to no clay. The natural moisture content ranged from 4.3 to 19.6% during the sampling period. The grading curves showed high percentage of fine passing BS standard sieves no. 8 (2.36 mm) and no. 40 (0.425mm) while less percentage passed no. 200 (0.075mm). The percentage passing these Sieves ranged from 99.3 to 100% for Sieve no. 8; 58.2 to 70.6% for Sieve no. 40 and 1.2 to 23.3% for Sieve no. 200 respectively. The specific gravity and maximum dry density varied across locations. The apparent cohesion was low, and the angle of internal friction ranged from 40 to 60 degrees. The allowable bearing capacity increased with depth, ranging from 25.9 to 70.8kN/m2. The soil was found to be predominantly fine-grained sand with low bearing capacity and high erodibility. Groundwater was discovered at depths not exceeding 3 m at some locations. The study recommends pad foundation with ground beams for simple structures and raft or pile foundation for complex and tall buildings.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright (c) 2024 Engineering Research journal