Production and Performance Evaluation of the Structural and Thermal Properties of Compressed Stabilized Earth Bricks (CSEB) Utilizing External Cullet (EC) and Polyethylene Terapthalete (PET)
Article PDF
Article XPS

Keywords

External cullet
Polyethylene terephthalate
Polystyrene
CSEB

How to Cite

Ikwebe, A.M., Tile, S.E., & Horsfall, B. (2024). Production and Performance Evaluation of the Structural and Thermal Properties of Compressed Stabilized Earth Bricks (CSEB) Utilizing External Cullet (EC) and Polyethylene Terapthalete (PET). Engineering Research Journal, 4(4), 14-20. https://www.openjournals.ijaar.org/index.php/erj/article/view/526

Abstract

Production and Performance Evaluation of the Structural and Thermal Properties of Compressed Stabilized Earth Bricks (CSEB) Utilizing External Cullet (EC) and Polyethylene Terapthalete (PET) was carried out in Makurdi, Benue State. This study was focus on the global challenge faced with the management of waste like polyethylene terephthalate and external cullet. The use of waste plastic bottles and glass for the production of compressed stabilized earth brick is an optimal method to solve the problem of storing waste materials and to optimize the cost for the production of building materials, which provides a friendly environment for both human and aquatic habitats. It was found that the highest and lowest thermal conductivity test falls between 0.251 and 0.165 W/mk respectively. While compressive strength EC/PET/Sharp sand and water in the ratio 30:18:45:7 using ASTM C67 (Standard 2014b). The highest and the lowest values of the compressive strength test are 3.85 and 2.00 respectively. This established that glass and plastic-derived CSEB are more rugged, more rigid, have low water absorption, high resistance to heat and are corrosion-resistant when compared to the convectional bricks produced from conventional cement and were found suitable for other engineering applications.

Article PDF
Article XPS
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright (c) 2024 Engineering Research journal

277 340