EFFECTS OF PARTICLE SIZE ON MECHANICAL, THERMAL AND CORROSION BEHAVIOUR OF QUARRY-DUST REINFORCED ALUMINIUM 6063 COMPOSITES
Article PDF

Keywords

Quarry dust
Particle size
Thermal analysis
Mechanical properties
Corrosion

How to Cite

Akoono, S. A, Folorunso, D.O, Barnabas, A. A, & Enewo, S. I. (2023). EFFECTS OF PARTICLE SIZE ON MECHANICAL, THERMAL AND CORROSION BEHAVIOUR OF QUARRY-DUST REINFORCED ALUMINIUM 6063 COMPOSITES. Engineering Research Journal, 3(1), 10-23. https://www.openjournals.ijaar.org/index.php/erj/article/view/153

Abstract

This research investigated the effects of particle size on the mechanical, thermal and corrosion behaviour of quarry dust-reinforced (QD) aluminium 6063 composites. Double stir casting process was used to produce the composites with quarry dust of different particle sizes. Mechanical characterisation, thermal and corrosion behaviours were used to assess the performance of the produced composites and compared with the unreinforced aluminium 6063 alloy. The results showed that the hardness of the aluminium composites improved generally compared to the unreinforced alloy and decreased with increasing particle size. Sample A with 30+45 µm particles had the highest ultimate tensile strength of 106 N/m2 and this  was seen to decrease marginally as the particle size increased.  Sample A also had the highest impact energy of 10.5 J and this reduced as the particle size increased.  The hardness value of the reinforced composites was generally higher than the unreinforced sample with sample A having a hardness value of 89.7 VHN. Thermal conductivity was found to increase with increasing temperature with Sample A having the highest thermal conductivity value of 194 W/mk at 300 oC. The  potentiodynamic results of the study conducted shows that sample A is less prone to corrosion attack  in 3.5 weight % NaCl environment with corrosion rate of  0.060087 mmpy. The addition of quarry dust to Al6063 alloy shifted the Ecorr downwards, depicting that the quarry dust can be utilized to inhibit corrosion of Al6063 in 0.5M H2SO4 environment. However, the highest resistance of the dissociation of Al 6063 composite system was observed in composite Sample D in acidic environment having the least corrosion rate of 3.4938 mm/year with corrosion current density of 320.99 A/cm2. The results from this research shows that the use of quarry dust as a single reinforcement do not jeopardise the integrity of the material most especially in saline environment.

Article PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright (c) 2023 Engineering Research journal

652 249