Modeling and Simulation of Heavy Axle Loads on Bridge Superstructure using ANSYS Workbench
Article PDF

Keywords

Axle loads, ANSYS Workbench, Bridge Deflection, Finite Element, Modelling, Simulation.

How to Cite

Jibril, S., Abubakar, A., Mohammed, A., & Lawal, I. M. (2025). Modeling and Simulation of Heavy Axle Loads on Bridge Superstructure using ANSYS Workbench. Engineering Research Journal, 5(3), 29-41. https://www.openjournals.ijaar.org/index.php/erj/article/view/1452

Abstract

This paper presents investigation on the effect of heavy axle loads on 2-span Reinforced Concrete Bridge superstructure using ANSYS workbench. The bridge is a link between the Nigeria export processing zone and Kano city.  Damage to bridges is as a result of its repeated load-carrying capacity. The continuous flow of automobiles results in degradation and subsequent decline in the mechanical properties of the deck, leading to reduced reliability over an extended period. This research employed a relatively cost effective numerical approach to evaluate the possible damage accumulated and finite element model (FEM) of the bridge deck was developed based on preliminary calculations using information gathered from built drawings which help to predict the deterioration rate of the superstructure using simulation capability of ANSYS 2018. A single span of 16m by 8m width was isolated for a detailed structural analysis. The bridge 3D-geometry and material properties were modeled in ANSYS with calibration from CSiBridge v17 program and simulated in accordance with “British Code of Practice for Highway Bridges (BS 5400). At serviceability, the bridge maximum deflections at deck using ANSYS and CSI Bridge were 1.07.mm to 2.6mm and 1.1mm to 3mm respectively while at deck/girder were between 8.179mm to 11.673mm and 5mm to 11.1mm simulations respectively and values are within the acceptable range of span800-span1200mm or (13.33 – 20mm). The deck service stresses were found to be within the endurance Stress e (2 - 3.5)N/mm2 defined by the materials data. This study provides valuable scientific and practical outcomes that can be utilized in the design and operation of bridge structures, contributing to the development of infrastructure and ensuring the safety of transportation systems. The use of ANSYS software in the analysis process enhances the accuracy, and efficiency of the research, further emphasizing its relevance in the analysis of bridge.

Article PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright (c) 2025 Engineering Research journal

214 153