Development of an Enhanced Multilevel Modular Powered Dc-Ac Inverter
Article PDF

Keywords

DC-AC converter, geothermal, semiconductor switch, pulse width modulation, Phase-Shift.

How to Cite

Ogwuche, J. O. (2025). Development of an Enhanced Multilevel Modular Powered Dc-Ac Inverter. Engineering Research Journal, 4(6), 1-32. https://www.openjournals.ijaar.org/index.php/erj/article/view/1438

Abstract

Power DC-AC converter is a power electronics device that converters DC power to AC power at desired voltage and frequency. DC-AC converter system may derive their power sources from solar panels, fuel cells, wind power, geothermal source, supper capacitors. Numerous industrial applications have begun to require higher power apparatus in recent years. Some medium voltage motor derives and utility applications require medium voltage and megawatt power level. For a medium voltage grid, it is troublesome to connect only one power semiconductor switch directly. As a result, a multilevel power converter structure was introduced as an alternative in high power and medium voltage situations. The research modeled, simulated and controlled a five level MMI. The inverter topology was achieved using a 4kV dc source which converts the dc voltage to a 5 level phase voltage at the output and a 9 level line to line voltage at the output. The model presented in this paper was modulated using Phase-Shifted pulse width modulation scheme. This control scheme helped to maintain all the capacitors as fixed voltage sources. The MMI model was carried out using the half bridge sub module: with 8 sub modules, SM per phase: four SMs for the upper arm and 4 for the lower arm respectively; with each of the arms consisting of an inductor which serves as a current limiter. The modeling, simulation and control was done using MATLAB/Simulink blocks.

Article PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright (c) 2025 Engineering Research journal

291 165