Application of Directional Solidification Technology in the Casting of Aluminum Alloy for Engineering Applications
Article PDF

Keywords

Directional Solidification, Solid/liquid interface, Characterization, Microstructures

How to Cite

Momoh, M. I., Ademoh, J., & Lawal, S. (2026). Application of Directional Solidification Technology in the Casting of Aluminum Alloy for Engineering Applications. Engineering Research Journal, 6(2), 97-104. https://doi.org/10.46654/d0e6je33

Abstract

This research investigates the mechanical and microstructural properties of a Directionally Solidified (DS) aluminum alloy produced using a tapered pattern of 500 mm length, with diameters of 40 mm and 20 mm at opposite ends. The study aims to evaluate how varying cooling rates across the casting influence hardness, impact strength, tensile strength, and grain morphology. The methodology involved producing a tapered wooden pattern, preparing the mold, melting and pouring the aluminum alloy, and carrying out shakeout and finishing operations. The solidified alloy was sectioned into specimens from both thin and thick ends for testing. Mechanical characterization included impact and hardness testing, with tensile strength estimated from hardness values. Microstructural examination was conducted using optical microscopy. The results revealed a clear relationship between cooling rate, grain morphology, and mechanical properties. Specimens from the thinner end, which solidified rapidly, developed fine equiaxed grains that enhanced impact resistance (up to 56 J) but exhibited lower hardness and tensile strength. Conversely, specimens from the thicker end solidified more slowly, forming coarse dendritic and columnar grains. These structures yielded higher hardness (up to 40.25 HV) and tensile strength (121 MPa), but reduced toughness (impact energy as low as 45 J).The study concludes that directional solidification effectively tailors the mechanical performance of aluminum alloys by controlling grain structure through cooling gradients. Fine equiaxed grains favor impact resistance, while coarse dendritic grains enhance hardness and strength. The research recommends optimizing DS casting parameters to balance toughness and strength for industrial applications, particularly in aerospace, automotive, and structural components.

Article PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright (c) 2026 Engineering Research journal

143 135