Design of Wet Milling Thermal Process Plant to Produce 5 Tons Per Day of Cassava Fufu to Enhance Food Security in Nigeria
PDF

Keywords

Food Security; Mass Balance; Energy Balances; Costing; Economic Evaluation.

How to Cite

Sampson, I. E. (2026). Design of Wet Milling Thermal Process Plant to Produce 5 Tons Per Day of Cassava Fufu to Enhance Food Security in Nigeria. African Journal of Sustainable Agricultural Development, 7(2), 149-168. https://doi.org/10.46654/c6thb372

Abstract

Among the staple foods in Nigeria, cassava fufu is one of the most consumed among the most vulnerable and poor Nigerian populace, hence large scale production of fufu from cassava starch using the wet milling process technology could enhance food security in Nigeria. This research designed a Cassava Fufu Production Plant that could produce 5 Tons of cassava fufu per day. 181,441 Cassava Fufu Production Plants distributed evenly as 235 smallplants per Local Government Area in Nigeria are used. A heat generation of 434,661,562.50 kJ/kg shows that much heat is lost from the reactor, hence the need for use of suitable lagging material such as foam glass to enhance heat conservation. The fundamental dimensions of the reactor are: 0.07716 m3 volume; 0.3 metre diameter; 1.0914 metre height; 0.09 metre impeller diameter; 0.75 metre length of jacket; 0.108 metre vertical distance between adjacent stirrer blades and 0.075 metre height of hemispherical head. A pay-back period of 2 years, 5 months, a rate of return of 41.38% and a net annual profit of ₦ 302,018.8188 shows that a cassava fufu production process plant if well managed could be economically viable in Nigeria. The Nigerian Government and the private investors are therefore encouraged to set-up the plants as much profit could be made from the investment.

PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright (c) 2026 African Journal of Sustainable Agricultural Development

0 0